Speedfit Lay Flat Pipe 22mm 50m Coil

The John Guest JG Layflat Polybutylene Barrier Pipe offers better flexibility than standard polybutylene and PEX pipes, making cabling through joists and long pipe runs faster and easier. The flexibility of the pipe reduces the need for fittings significantly compared to traditional copper pipe systems, delivering labour and cost savings.

When removed from the coil, the pipe ?lays flat and stays flat' meaning there are no issues with the pipe retaining its memory and trying to coil back into place. The pipe is made up of 5 layers, the centre of which is a coloured oxygen barrier to prevent the ingress of air into the system, reducing the effect of corrosion on metal components.

Designed, manufactured and assembled in the UK, Layflat is available in standard UK plumbing sizes that reduces wastage compared to non-UK sizes.

Speedfit Features

- Push-fit and demountable connections

- Suitable for hot and cold water and central heating systems

- Grip and Seal connection

- Lead free and non toxic

- No scale build up and Corrossion Free

- BSI and WRAS approved

- Pipes Speedfit fittings can be used with Copper pipe to BS EN 1057 and Speedfit Barrier Pipe to BS7291.

- Speedfit fittings CANNOT be used on stainless steel pipe.

- Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit 'PEM', 'PSE' and 'SFM' Fittings and Speedfit Barrier Pipe are kitemarked to BS7291 Parts 1, 2 and 3, Class S (Licence No. KM39767).

Applications

- Mains fed and indirect cold water systems

- Vented and unvented hot water systems

- Vented and sealed central heating systems

- DO NOT USE FOR Gas, fuel oil or compressed air applications.

Connection to compression fitting

Many, but not all, compression fittings are suitable for use with plastic fittings and pipe. Users should therefore check for compatibility. Compression fittings with short tube stop depth or hard olives should not be used with plastic fittings or pipe. When using compression fittings with Speedfit pipe, a Standard Pipe Insert (prefix TSM) must be used to withstand the compressive pressure of the olive. The olive must be located within the length of the pipe insert and the pipe fully inserted into the fitting. The connection should not need more than 2 full turns after the olive has gripped the pipe. Copper olives are preferable to brass olives.