JG Speedfit PEX Pipe Length 15mm x 3m

JG Speedfit white PEX barrier pipe length for hot, cold and central heating plumbing systems is flexible making it easier to run longer pipe runs. The flexibility of the pipe reduces the need for push-fit fittings significantly compared to traditional copper pipe systems, which in turn delivers labour and cost savings.

The JG Speedfit white PEX barrier pipe length is made of 5 layers, the centre of which is a blue coloured oxygen barrier that prevents the ingress of air into the system, reducing the effect of corrosion on metal components. Due to its low thermal conductivity, when carrying hot water, PEX pipe is cooler and therefore safer to touch.

Designed, manufactured and assembled in the UK.

Features

- Push-fit and demountable connections

- Suitable for hot and cold water and central heating systems

- Grip and Seal connection

- Lead free and non toxic

- No scale build up and Corrossion Free

- BSI and WRAS approved

- Pipes Speedfit fittings can be used with Copper pipe to BS EN 1057 and Speedfit Barrier Pipe to BS7291.

- Speedfit fittings CANNOT be used on stainless steel pipe.

- Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit 'PEM', 'PSE' and 'SFM' Fittings and Speedfit Barrier Pipe are kitemarked to BS7291 Parts 1, 2 and 3, Class S (Licence No. KM39767).

Applications

- Mains fed and indirect cold water systems

- Vented and unvented hot water systems

- Vented and sealed central heating systems

- DO NOT USE FOR Gas, fuel oil or compressed air applications.

Connection to compression fitting

Many, but not all, compression fittings are suitable for use with plastic fittings and pipe. Users should therefore check for compatibility. Compression fittings with short tube stop depth or hard olives should not be used with plastic fittings or pipe. When using compression fittings with Speedfit pipe, a Standard Pipe Insert (prefix TSM) must be used to withstand the compressive pressure of the olive. The olive must be located within the length of the pipe insert and the pipe fully inserted into the fitting. The connection should not need more than 2 full turns after the olive has gripped the pipe. Copper olives are preferable to brass olives.