This is a solvent based satin finish. It is tough, hardwearing and dirt resistant and does not require an undercoat (except where a strong colour change is required.) Up to 17m² per litre on sealed surfaces.
- Fashionable satin finish.
- Does not normally require undercoat.
- Tough, durable finish.
- Will withstand repeated washing.
17m² per litre
4-6 hours dependent upon temperature / humidity
Thinning not generally required.
To get the best results make sure surfaces to be painted are sound, clean and dry.
The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
Note : Whilst leading-edge technology has been used in the development of this product, the nature of solvent-based paints means that they will all discolour over time. The rate of discolouration is faster in areas with no natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Diamond Satinwood.