As the ideal foundation for Dulux Trade High Gloss, a solvent-based, fully VOC 2010 compliant undercoat for interior and exterior wood and metal. It is suitable for use on correctly prepared and primed interior and exterior surfaces where a solvent-based, high quality, durable high gloss system is required. Up to 17m² per litre on sealed surfaces.
- Best opacity.
- Excellent flow out of brush marks.
- Provides good build and obliteration.
- Retains good cling to sharp edges.
- Can be used with Dulux Trade Eggshell and Satinwood to provide surface obliteration over strong colours or poor surfaces.
17m² per litre
2-6 hours dependent upon temperature / humidity
Thinning not generally required.
To get the best results with Dulux Trade Undercoat, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Apply 1 coat of Dulux Trade Undercoat, followed by 1 or 2 coats of Dulux Trade High Gloss. Allow a minimum of 6 to 16 hours for the undercoat to dry before applying the gloss finish. Where a second coat of Dulux Trade High Gloss is required, allow a minimum of 16 hours between coats.
After use, remove as much paint as possible from brushes before cleaning with white spirit.
Note : Whilst leading-edge technology has been used in the development of this product, the nature of solvent-based paints means that they will all discolour over time. The rate of discolouration is faster in areas with no natural or UV light. For long-lasting whiteness, we recommend the use of a water-based formulation such as Dulux Trade Ecosure Water-Based Gloss.