An exterior quality, fine texture emulsion paint based on an all acrylic resin. It contains a fungicide to inhibit mould growth on the paint film. The formulation gives an attractive fine granular finish and allows a higher build.
- Helps bridge fine hairline cracks.
- Contains a fungicide and algicide to resist disfiguring surface growths on its surface.
- For a textured finish on exterior walls, including blockwork, concrete, stonework, cement rendering, roughcast, pebbledash & brick.
On smooth surfaces of low porosity: 6-8m² per litre On textured surfaces of low porosity: 3-4m² per litre. These figures are only an approximate guide.
1-2 hours dependent upon temperature and humidity.
Brush, roller or spray.
For sealing new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: thinning should not exceed 1 part clean water to 10 parts paint.
To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Seal new or bare surfaces with a thinned first coat of Dulux Trade Weathershield Textured Masonry Paint (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Weathershield Textured Masonry Paint, but on previously painted surfaces in good condition, where similar colours are used, 1 coat may be sufficient.
After use, remove as much paint as possible from brushes before cleaning with clean water.