Cuprinol TimberCare has been specially formulated to colour and protect rough sawn timber. Its special pigments ensure rich colour and even coverage in just one coat. Cuprinol TimberCare is quick-drying, low odour and safe to use around plants and pets.
- Colour and weather protection
- Even coverage in one coat
- For rough-sawn wood
5L + 20%
24 sq metres or 8 fence panel sides.
2-4 hours dependent upon weather conditions.
Do not thin.
Read all Health, Safety and Environmental Information before use. Bare or untreated wood should be pre-treated with an appropriate wood preserver to prevent rot and decay. Surfaces should be dry and free from dirt and algae etc.
Please note that the colour in the tub may be different to the final shade when dry. Brush on evenly along the grain. If a deeper colour is required, more coats can be applied. Allow 2-4 hours between coats under normal weather conditions.
Reseal tub after use. Clean up any spills while still wet. After use remove as much product as possible from brushes and rollers before cleaning with water. Store in dry conditions and protect from frost.